• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Zhejiang, China (Mainland)
  • Brand Name: TKBHOME
  • Model Number: TSM02
  • Usage: PIR+Door /Window sensor+illumination+temperature
  • power: by CR123A Lithium battery
  • Transceiver: Yes
  • Operating Range: minimum 30 meters indoor,70 meters outdoor line of sight
  • operating temperature: -10℃-40℃ for indoor use only
  • frequency: 868.42MHz,908.42MHz
  • dimension: detector 28x96x23mm magnet .10x50x12mm

Packaging & Delivery

Packaging Details: in a carton
Delivery Detail: within 40days after receiving payment




Product Description



New ! 868.42MHz(EU)~908.42Mhz (US)~921.4MHz (AU)   slim multi-sensor TSM02 (z-wave PIR+Door /Window sensor+illumination+temperature 4in1)




The slim multi-sensor TSM02 has PIR, door/window, temperature and illumination, 4 sensors function in one, based on Z-WaveTM technology.


This device is one component of the Z-WaveTM sensor system and is
designed to work with all other Z-WaveTM enabled devices in a home
control network. The device adopt the Z-WaveTM 400 series chip, when
your Z-WaveTM network system is all made by Z-WaveTM 400 series
devices. The network system will have the advantages as below.

• Concurrent multi-channel support reduces external interference.
• Better RF range, improve about 10 meters in indoor.
• Support 100 Kbps transmit speed, speed up communication.


Power by CR123A lithium battery.
Signal (Frequency):
868.42 MHz(EU),
908.42 MHz(US),
921 MHz(AU, NZ)

Minimum 30 meters indoor,
70 meters outdoor line of sight.
Operating Temperature: -10oC ~ 40oC
For indoor use only.


Specifications subject to change without notice due to continuing product improvement.  


Adding to z-wave network:


In the first time, add the device into the Z-WaveTM network. First, make
sure the primary controller is in the inclusion mode. And then power on
the device, just take out the insulation Mylar in the back side of the
device. The device will auto start the NWI (Network Wide Inclusion)
mode. And it should be included in 5 seconds. You will see the LED
light ON one second.


Inclusion1. Have Z-WaveTM Controller entered Inclusion mode.
2. Pressing tamper key three times within 1.5 seconds
will enter inclusion mode.
3.After inclusion successful ,the device will wake to receive the setting command from z-wave controller about 20 seconds.

1.Have z-wave controller entered exclusion mode.

2.Pressing tamper key three times within 1.5 seconds will enter exclusion mode.

Node ID has been excluded


1.Pressing tamper key four times within 1.5 seconds and do not release the tamper key in the 4th pressed ,and the LED will turn on.

2.After 3 seconds the LED will turn OFF ,after that within 2 seconds,release the tamper key ,if successful the LED will light ON one second .Otherwise,the LED will flash once.

3.IDs are excluded and all settings will reset to factory default

Association1. Have Z-WaveTM Controller entered association
2. Pressing tamper key three times within 1.5 seconds
will enter association mode.
Note: The device support 2 groups. The group 1 is for
receiving the report message, like triggered event,
temperature, illumination etc. The group 2 is for light
control, the device will send the “Basic Set” command
to this group.






Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
China (Mainland) | Manufacturer
Transaction Level:
Supplier Assessments:
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $47,000
Learn More

2013 Hong Kong Electronics

Fair (Spring Edition)

Date: 13-16 April 2013     
Fair Address: HK Convention

and Exhibition Centre